Fume hood installation manual

All Fume Hoods are “double wall” construction, consisting of an outer wall separated by a 4 inch (mm) space and the interior work space wall of the Fume Hood. This area forms the plumbing chase for the routing and connection of all services required in the Fume Hood, including electrical outlets. the fume hood installation make sure the fl oor is clean and level. All service lines for the Fume hood installation, such as water, air, gas, etc. should be purged of dirt, capped and tested prior to connection to the fume hood. fume hood is called the face velocity. The Model FHC50 Fume Hood Controller can be configured to continuously monitor fume hood face velocity by measuring the air velocity across a sensor mounted in the sidewall of the hood. The sensor and opening in the fume hood are driven by the same pressure differential so the velocity across each is related.

This manual gives information for the operation and care of fume hoods and other equipment items. Utility and fine appearance can be assured for many years by following simple procedures. A regular schedule of maintenance will be most effective. Upper Side Panel Mechanically Fastened Access Panel Sash HOOD IDENTIFICATION Lower Side Panel. OPERATION, MAINTENANCE AND INSTALLATION INSTRUCTIONS INSTALLATION FUME HOOD SUPERSTRUCTURE INSTALLATION Side Enclosure Panels 1. Lower the side panel into the side frame of the fume hood superstructure, engaging the frame’s lower lip. While pressing down on the two black catches, rotate the side panel and engage the frame’s upper lip. Gently apply. Install the FUME HOOD unit onto the support base once section is fully Use a team to lift the unit onto the support base. Ensure proper alignment of the edges of the support base and FUME HOOD. The back of the unit has holes that allow the use of self tapping screws to secure the FUME HOOD to the support base. The front of the.

Original instructions. About This Manual. This manual is designed to help you learn how to install, use, and maintain your laboratory fume hood. case this manual and/or test report is lost or misplaced, NuAire, Inc. retains a Keep these operating instructions close to the fumehood so that safety. Protector XL Floor-Mounted (Walk-In) Laboratory Fume Hoods Manual (Present) Transfer Chamber Pressure Gauge Kit Instruction Sheet.